What we offer

We offer a complete production line of 17 machines,
single machines will also be sold.

Output of each machine:
approx. 20 kg brass or copper wool per hour

Power demand: 5,5 kW

Aggregates: 2
Wire diameter: 3.10
Speed: 250 - 280 kg/h

• Processing of the wire in one operation
• Steel wool of the highest quality
• Wire fractures are virtually excluded
• solid steel construction for quiet and vibration-free running of the machine
• large grooved wheels to reduce the bending resistance of the wire
• lubricating device on the knife bar for lubrication of the wire and the knives
• 72 stainless knife holder with a knife width of 120 mm
• rugged worm gear with a efficiency of 98 %
• hardened and grinded worm wheels, (well worm wheels made of bronze) for a low power requirement
• suction device for dust and fumes
• free delivery of steel foundations, therefore a short and easy assembly with you

Technical data / WEB0 II
Aggregates:                       2
Wire diameter:                   3.10 mm
Output (approx) at an operating speed of 110 m/min: 250 - 280 kg/h
Power consumption:         110 kW
Number of knife holder:    72
Wire passage:                    1
Operators:                          3
Wool quality:                    10 - 000
Total machine length:      15 m
Total machine weight:     13500 kg

the tearing and rolling machine serves to steel wool strips on certain lengths to tear down and to roll

• It can be produced pads of 6 - 50 g and 50 - 120 mm wide be produced
• the machine is equipped with a clutch-brake combination, for exact tearing of the wool strip
• the roll machine is fixed at the tearing machine, so the machine can be taken in / out of operation
• the drive is over 2.2 kW motor. Over regulating wheels can the speed of the machine to be continuously adjusted.
• the roll machine is equipped with a wear-resistant rubber band.

Technical data / Tearing and Rolling Machine

Roller width:                   50 - 120 mm
Roller weight                  6 - 50 g
Output:                           80 - 120 pcs / min
Power consumption:       2.2 kW
Operator:                        1
Total machine length:    3.20 m
Total machine weight:   850 kg

for a wire diameter  of 3.25 mm, power 280 - 380 kg per hour

with the power consumption 132 kW

The condition is new.

Production: 200Kg/h
Power consumption: Kw 25; 50 Hz
Floor Space required: 2,10 x 2,00 x 2,80 m
Weight: 1200kg

The steel wool chopper we developed has a special suction system that prevents fires.
It is used to shred steel wool, copper and aluminum wool into the desired powder size.
The steel wool can be fed directly from the steel wool machine or through coiled bobbins.

The condition is as good as new.

for preparation of wet mix

Machine No: 32000-001
Production date: 1999
Aprox. Capacity: 200 kg of dry mix
Power: 23.5 kW

for production of coated welding electrodes OERLIKON, type WEP 220

Hydraulic unit with maximum pressure: 285 bar
Maximum extruding pressure: 220 tons

Two exchanged cylinders each with following dimensions:
diam. 180 mm, length 1050 mm, volume 26 liters
Max. Capacity of wet mix: 14 liters/min

Transverse belt for extruder WEP 220 „Oerlikon“ AB1 R02 and conveyor with grinding and printing systems for extruder WEP 220 „Oerlikon“

Wire length: 225 – 450 mm
Capacity for 350 mm: 65 – 1550 per minute

Conveyor System with grinding and printing accesories BM2 003 „Oerlikon“

Type: „СДО-10.12,5.10/5-И2“
Production year: 1990
Nominal power: 78.3 kW
Permissible power: 85.8 kW
Needed Voltage of grid: 380/220 V
Nominal max. temperature: 500 °C
Work Atmosphere: air
Uniformity of temperature: ±15 °C
PLCs: exists from year 2002.

Four different programs are possible,
each one from maximum 20 steps.

Type: SNOL 2000/550
Production year: 2005
Nominal power: 65 kW
Needed Voltage of grid: 380 V
Nominal max. temperature: 550 °C
Work Atmosphere: air
Uniformity of temperature: ±5 °C
PLCs: exists from year 2005.

Four different programs are possible, each one from maximum 20 steps..